This intake is for the Treats Reed kit with a Malossi VL8 reed kit while using a Dellorto PHBG 21 carb.
This intake will be printed out of PA6-GF. The coupler will be printed out of TPU 95A. I will remove supports and clean up the print before shipping.
Included in this sale:
1- custom 3D printed fiberglass reinforced nylon (PA6-GF) intake
1- custom 3D printed TPU coupler
*You will need to supply the OEM screws that were provided with the Malossi reed kit.
*You will need to source hose clamps.
*periodic tightening of screws will be required just like all the other bolts on vintage bikes.
*VERY LIGHT application of Yamabond or other sealant is highly recomended for perfect seal to reed block.
This intake is for the Treats Reed kit with a Malossi VL8 reed kit while using a Dellorto PHBG 21 carb.
This intake will be printed out of PA6-GF. The coupler will be printed out of TPU 95A. I will remove supports and clean up the print before shipping.
Included in this sale:
1- custom 3D printed fiberglass reinforced nylon (PA6-GF) intake
1- custom 3D printed TPU coupler
*You will need to supply the OEM screws that were provided with the Malossi reed kit.
*You will need to source hose clamps.
*periodic tightening of screws will be required just like all the other bolts on vintage bikes.
*VERY LIGHT application of Yamabond or other sealant is highly recomended for perfect seal to reed block.
